Email Setup Wizard

Microsoft 365 + Namecheap

Set up Microsoft 365 email on Namecheap

The records Microsoft 365 needs, written with the field names Namecheap uses (Host, Value), in the order to add them.

  • 6 steps
  • 7 DNS records
  • Sources checked October 21, 2026

Before you start

  1. Have your Microsoft 365 account ready. Some values are unique to your account and come from the Microsoft 365 admin center.
  2. Open DNS at Namecheap: Sign in to Namecheap and select Domain List in the left sidebar. Select Manage next to your domain. Open the Advanced DNS tab.
  3. Keep both tabs open and add the records below one at a time.

Microsoft 365 also publishes its own guide for Namecheap: Connect DNS records at Namecheap to Microsoft 365 (Microsoft Learn) .

Records to add

Copy each value with the button next to it. Rows marked “Copy from Microsoft 365 admin center” are unique to your account.

Domain verification Proves you own the domain Type TXT Host @ Value Copy from Microsoft 365 admin center Looks like: MS=ms followed by digits Priority n/a TTL 3600 (1 h)
MX records Where incoming email goes Type MX Host @ Value Copy from Microsoft 365 admin center Looks like: <your MX token>.mail.protection.outlook.com, or for domains set up on Microsoft's newer DNSSEC infrastructure <your MX token>.<subdomain>.mx.microsoft Priority 0 TTL 3600 (1 h)
SPF record Which servers may send as you Type TXT Host @ Value v=spf1 include:spf.protection.outlook.com -all Priority n/a TTL 3600 (1 h)
DKIM A signature on every message · recommended Type CNAME Host selector1._domainkey Value Copy from Microsoft 365 admin center Looks like: selector1-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector1-yourdomain-com._domainkey.<prefix>.onmicrosoft.com) Priority n/a TTL 3600 (1 h)
DKIM A signature on every message · recommended Type CNAME Host selector2._domainkey Value Copy from Microsoft 365 admin center Looks like: selector2-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector2-yourdomain-com._domainkey.<prefix>.onmicrosoft.com) Priority n/a TTL 3600 (1 h)
DMARC record What to do with fakes · recommended Type TXT Host _dmarc Value v=DMARC1; p=none; pct=100; rua=mailto:dmarc@yourdomain.com Priority n/a TTL Automatic
Autodiscover Automatic app setup · recommended Type CNAME Host autodiscover Value autodiscover.outlook.com Priority n/a TTL 3600 (1 h)

Step by step in Namecheap

Verify your domain

Your email provider needs proof that you control this domain before it accepts email for it.

Type
TXT
Host
@
Value
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft 365 admin center go to Settings > Domains and add your domain (or select it and choose Start setup). On Verify you own your domain, choose Add a TXT record to the domain's DNS records and copy the TXT value.

It looks like: MS=ms followed by digits

  • This record only proves you own the domain. It doesn't affect anything else and can be deleted after verification.
  • Verification usually takes up to 10 minutes after adding the record, sometimes up to 48 hours.

In Namecheap

  1. In the Host Records section, select Add New Record.
  2. In the Type drop-down, choose TXT Record.
  3. Fill in Host and Value, and pick a TTL.
  4. Select the check mark, or Save All Changes, to save.

Point your MX records

MX records tell every other mail server where to deliver email for your domain. They must point to your provider and nowhere else.

Type
MX
Host
@
Priority
0
Value
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft 365 admin center go to Settings > Domains, select your domain, then DNS records > Manage DNS. On the Add DNS records page, expand MX Records and copy the value.

It looks like: <your MX token>.mail.protection.outlook.com, or for domains set up on Microsoft's newer DNSSEC infrastructure <your MX token>.<subdomain>.mx.microsoft

  • Use the highest priority your host allows, typically 0.
  • Remove MX records that point to your previous email provider, or give them a lower priority (a higher number) than the Microsoft 365 record.
  • Add users and mailboxes in Microsoft 365 before switching the MX record so incoming mail keeps flowing.
  • Exchange Online only supports TTL values under 6 hours (21,600 seconds).

In Namecheap

  1. In the Mail Settings section, choose Custom MX from the drop-down list. You may need to scroll the list to find it.
  2. Select Add New Record.
  3. Enter @ as the Host, the mail server as the Value, and the Priority in the box to the right of the Value.
  4. Select the check mark to save the record.
  5. Delete every other MX record with its trash icon, then confirm with Yes.

Add the SPF record

SPF is a TXT record that lists the services allowed to send email from your domain, so receivers can spot forgeries.

Type
TXT
Host
@
Value
v=spf1 include:spf.protection.outlook.com -all
  • If an SPF record already exists, don't create a second one. Add include:spf.protection.outlook.com to the existing record so there is a single SPF record.
  • Microsoft recommends -all (hard fail) together with DKIM and DMARC.
  • Only one SPF record is allowed per domain, and it must stay under 10 DNS lookups.

In Namecheap

  1. In the Host Records section, select Add New Record.
  2. In the Type drop-down, choose TXT Record.
  3. Fill in Host and Value, and pick a TTL.
  4. Select the check mark, or Save All Changes, to save.

Set up DKIM (recommended)

DKIM publishes a public key so receivers can confirm your messages really came from you and were not changed on the way.

Type
CNAME
Host
selector1._domainkey
Value
Copy it from Microsoft 365 admin center (see below)

Where to find your value

In the Microsoft Defender portal open Email authentication settings (security.microsoft.com/authentication), select the DKIM tab and your domain, then copy the two CNAME values. They are also shown in the admin center under Add DNS records > Advanced options > DomainKeys Identified Mail (DKIM).

It looks like: selector1-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector1-yourdomain-com._domainkey.<prefix>.onmicrosoft.com)

  • Microsoft lists DKIM as optional, but DMARC needs DKIM to align with your domain.
  • After both CNAME records resolve, turn on Sign messages for this domain with DKIM signatures in the Defender portal.
Type
CNAME
Host
selector2._domainkey
Value
Copy it from Microsoft 365 admin center (see below)

Where to find your value

Same place as selector1: Defender portal > Email authentication settings > DKIM tab > your domain.

It looks like: selector2-yourdomain-com._domainkey.<your onmicrosoft prefix>.<letter>-v1.dkim.mail.microsoft (older domains: selector2-yourdomain-com._domainkey.<prefix>.onmicrosoft.com)

  • Add both selector records. Microsoft rotates between them.

In Namecheap

  1. In the Host Records section, select Add New Record.
  2. In the Type drop-down, choose CNAME Record.
  3. Fill in Host and Value, and pick a TTL.
  4. Select the check mark to save.
  5. Repeat for each CNAME record above.

Add the DMARC record (recommended)

DMARC tells receivers what to do with mail that fails SPF and DKIM, and where to send reports about it.

Type
TXT
Host
_dmarc
Value
v=DMARC1; p=none; pct=100; rua=mailto:dmarc@yourdomain.com
  • Start with p=none and read the reports, then move to p=quarantine and finally p=reject. pct can step up in stages (10, 25, 50, 75, 100).
  • Replace the report address with a shared mailbox or group, not a personal inbox.
  • Set up SPF and DKIM first.
  • Microsoft 365 doesn't send forensic (ruf) reports.

In Namecheap

  1. In the Host Records section, select Add New Record.
  2. In the Type drop-down, choose TXT Record.
  3. Fill in Host and Value, and pick a TTL.
  4. Select the check mark, or Save All Changes, to save.

Add the Autodiscover record (recommended)

Autodiscover lets Outlook and other mail apps find your account settings without manual setup.

Type
CNAME
Host
autodiscover
Value
autodiscover.outlook.com
  • Optional but highly recommended: lets Outlook and other apps set up mailboxes automatically.

In Namecheap

  1. In the Host Records section, select Add New Record.
  2. In the Type drop-down, choose CNAME Record.
  3. Fill in Host and Value, and pick a TTL.
  4. Select the check mark to save.

Check your setup

Once the records are saved, run a live check. We look up your domain in public DNS and tell you what is right, missing or wrong, with the fix in Namecheap’s words.

We only read public DNS records. Nothing is stored.

Common mistakes with Microsoft 365 on Namecheap

Switching MX before adding mailboxes

Add users and mailboxes in Microsoft 365 before changing the MX record, or incoming mail has nowhere to go.

Adding a second SPF record

Microsoft says not to create a new SPF record if one exists. Add include:spf.protection.outlook.com to the existing record so there is a single SPF record.

Publishing DKIM CNAMEs but not turning on signing

After both selector CNAMEs resolve, switch on Sign messages for this domain with DKIM signatures in the Defender portal.

Using a TTL longer than 6 hours on MX

Exchange Online only supports TTL values under 6 hours (21,600 seconds). One hour (3600) is the recommended value.

Namecheap: Switch Mail Settings to Custom MX first

MX records for an outside email provider go in the Mail Settings section, and only after you choose Custom MX. The other options (Email Forwarding, Private Email, No Email Service) manage MX records for you.

Namecheap: No CNAME on the bare domain

A CNAME record on the bare domain (yourdomain.com) overrides every other record for that name and breaks email.

Visit Microsoft 365 Visit Namecheap

Rather have someone do it for you?

Tell us your domain and we will add and verify every record for Microsoft 365 on Namecheap, then send you the check results.

Request done-for-you setup

Microsoft 365 on Namecheap: questions

Where do I add Microsoft 365 DNS records in Namecheap?

Sign in to Namecheap and select Domain List in the left sidebar. Select Manage next to your domain. Open the Advanced DNS tab. Add each record there, one at a time.

What goes in the Host field at Namecheap?

Enter @ for records on your bare domain, such as MX and SPF. For the others, enter only the part before your domain, for example autodiscover. Namecheap adds your domain automatically.

Do I need to delete my existing MX records at Namecheap?

Remove MX records that point to your previous email provider, or give them a lower priority (a higher number) than the Microsoft 365 record. MX records for an outside email provider go in the Mail Settings section, and only after you choose Custom MX. The other options (Email Forwarding, Private Email, No Email Service) manage MX records for you. A CNAME record on the bare domain (yourdomain.com) overrides every other record for that name and breaks email.

Where do I get my Microsoft 365 DKIM record?

In the Microsoft Defender portal open Email authentication settings (security.microsoft.com/authentication), select the DKIM tab and your domain, then copy the two CNAME values. They are also shown in the admin center under Add DNS records > Advanced options > DomainKeys Identified Mail (DKIM).

How long until Microsoft 365 email works on Namecheap?

DNS changes typically take about 15 minutes to take effect, occasionally longer.

Sources

Every value and step on this page comes from these official pages. Dashboards change, so if something doesn’t match what you see, tell us.

Microsoft 365 on other hosts

Other email providers on Namecheap